New Products

Wallrock Fibreliner is the lining paper of choice for professional and DIY decorators who require an easy to hang product, that is made to superior quality standards. Fibreliner is incredibly strong and durable, doesn’t shrink or expand and is scuff resistant.

Wallrock Fibreliner is a premium lining paper that can be used as a Paste the Wall or paste the paper product. It’s a tough lining paper that is scuff and wear resistant. It doesn’t shrink or expand and there is no need to soak it.

Benefits of Wallrock Fibreliner

Fire rated (B) – Meets all UK and European Regulations

Amazing Strength and Durability

Scuff and Wear resistant

Allows Walls to Breathe

Covers and Reinforces Damaged and Cracked Plaster

Suitable for Ceilings

Paintable

Paste the Wall or the Paper

Quick and Easy to Hang

Contains no fibre glass PVC free

Dry strippable

Does not shrink or expand

No soaking required

Environmentally Friendly FSC Accredited Paper

Wallrock Fibreliner Smooth is able to cover and reinforce walls where plaster is cracked or crumbling whilst offering breathability for a healthy home. Easy to hang, paintable and suitable for walls or ceilings, Wallrock Fibreliner Smooth is a great choice for any home décor project. The ultra-smooth finish is perfect for achieving a luxurious finish without the hassle.

Benefits of Wallrock Fibreliner Smooth

Extra Smooth Finish

Fire rated (B) – Meets all UK and European Regulations

Amazing Strength and Durability

Scuff and Wear resistant

Allows Walls to Breathe

Covers and Reinforces Damaged and Cracked Plaster

Suitable for Ceilings

Paintable

Paste the Wall or the Paper

Quick and Easy to Hang

Contains no fibre glass PVC free

Dry strippable

Does not shrink or expand

No soaking required

Environmentally Friendly FSC Accredited Paper

Timbabuild® Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent free, resin primer which is designed to strengthen weakened wood fibres by penetrating deep into the wood.

EWS is designed to be used as a primer in conjunction with the Epoxy Rapid Cure (ERC10) or Epoxy High Build (EHB60) systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute. The 2:1 mixing ratio should be strictly observed. EWS should be applied using a standard brush and left to cure for at least 20 minutes.

Use disposable paint brushes – cleaning is not possible after use.

Timbabuild® EHB60 Professional manufactured by Chemfix, is a two-part thixotropic 1:1 ratio mix solvent free, epoxy based wood filler. It is specially designed for large and extensive repairs to areas of damaged and rot affected timber.

For repairs up to 60mm depth.

Timbabuild® ERC10 manufactured by Chemfix, is a two-part solvent-free 1:1 ratio mix, epoxy based wood filler & adhesive. It is specially designed for small repairs to timber which are subject to stress and impact or for splicing new timber sections.

For repairs up to 10mm depth.

Timbabuild® EHB DUO Professional manufactured by Chemfix, is a two-part thixotropic 1:1 ratio mix solvent free, epoxy based wood filler. It is specially designed for large and extensive repairs to areas of damaged and rot affected timber.

For repairs up to 60mm depth.